About this file
This is a dump of the DQ200 gearbox control unit. Software number 0AM300049B, firmware version 1808.
Typical use: writing the unit after a failed flash, restoring lost software, or replacing the mechatronic when the label shows the same software number and the same version.
Archive contents
| Full backup |
vag_temic_dq200-mqb_bench_fullbackup_0000000013609e0182060010270de000_20231002081713_fullbackup.mmf |
493 360 bytes |
| Flash |
vag_temic_dq200-mqb_bench_fullbackup_0000000013609e0182060010270de000_20231002081713_int_flash.bin |
1 540 096 bytes |
| Internal EEPROM |
vag_temic_dq200-mqb_bench_fullbackup_0000000013609e0182060010270de000_20231002081713_int_eeprom.bin |
131 072 bytes |
| External EEPROM |
vag_temic_dq200-mqb_bench_fullbackup_0000000013609e0182060010270de000_20231002081713_ext_eeprom.bin |
8 192 bytes |
How to use
- Pay for the file. The download button appears on this page and a copy is sent by email.
- Open the archive in your programmer and check the checksum before writing.
- Write only to a DQ200 unit with software 0AM300049B and version 1808.
Before writing
Check software number 0AM300049B and version 1808 against the unit label. Writing this file into a unit with different numbers can damage the unit. If you need another version of this software, choose it below or search the catalog.