About this file
This is a dump of the DQ250 gearbox control unit. Software number 02E300051, firmware version 1812.
Typical use: writing the unit after a failed flash, restoring lost software, or replacing the mechatronic when the label shows the same software number and the same version.
Archive contents
| Full backup |
fxx_bench_fullbackup_0000000014603008830600102516e000_20221212133646_fullbackup.mmf |
355 168 bytes |
| Flash |
fxx_bench_fullbackup_0000000014603008830600102516e000_20221212133646_int_flash.bin |
1 540 096 bytes |
| Internal EEPROM |
fxx_bench_fullbackup_0000000014603008830600102516e000_20221212133646_int_eeprom.bin |
131 072 bytes |
| External EEPROM |
fxx_bench_fullbackup_0000000014603008830600102516e000_20221212133646_ext_eeprom.bin |
8 192 bytes |
How to use
- Pay for the file. The download button appears on this page and a copy is sent by email.
- Open the archive in your programmer and check the checksum before writing.
- Write only to a DQ250 unit with software 02E300051 and version 1812.
Before writing
Check software number 02E300051 and version 1812 against the unit label. Writing this file into a unit with different numbers can damage the unit. If you need another version of this software, choose it below or search the catalog.