About this file
This is a dump of the DQ500 gearbox control unit. Software number 0BH300011G, firmware version 1407.
Typical use: writing the unit after a failed flash, restoring lost software, or replacing the mechatronic when the label shows the same software number and the same version.
Archive contents
| Full backup |
vag_continental_dq500_bench_fullbackup_81008b8a0c00940882060010270de000_20260709100940_fullbackup.mmf |
1 008 752 bytes |
| File |
vag_continental_dq500_bench_fullbackup_81008b8a0c00940882060010270de000_20260709100940_maps.bin |
1 540 096 bytes |
| Internal EEPROM |
vag_continental_dq500_bench_fullbackup_81008b8a0c00940882060010270de000_20260709100940_int_eeprom.bin |
131 072 bytes |
How to use
- Pay for the file. The download button appears on this page and a copy is sent by email.
- Open the archive in your programmer and check the checksum before writing.
- Write only to a DQ500 unit with software 0BH300011G and version 1407.
Before writing
Check software number 0BH300011G and version 1407 against the unit label. Writing this file into a unit with different numbers can damage the unit. If you need another version of this software, choose it below or search the catalog.